So far, most electricity on earth are produced from non-problem sources (oil, gas, stone and brown coal.These fossils are not limited, so the price of electricity will increase in the near future, if scientists will increase the price to prepare new cheap and highly effective ways to use non-sensitive energy sources (sun, wind, earth temperature and treatment).
Electric saving by optimizing the consumption
First of all, in some cases you should think whether to completely leave the use of electrical appliances or whether they can reduce their work time.You must pay attention to the following points:
- If possible, use the daylight day to increase the maximum lightening of the room.The windows will allow regular curtains, open curtains, open curtains, then the foot will burn later, it will give you noticeable deposits in general.In addition, light wallpapers or paint over the wallpapers or ceiling can return to 80% of sunlight, while in the room is lighter during the repair of dark colors.
- Increase land light lamps and especially the light of the ceiling device 10-15%.If you use a clean chandelier with the open plastic, you can screw a light lamp.
- It is recommended to get the upper chandelier with the possibility of the cord of the bulbs.While looking at a single TV program, a lamp will be enough and use fully lighting while receiving guests.
- Combined lighting (wall lamps, table lamps) are a way to create the necessary atmosphere in buildings, not only to save electricity at home, but also the necessary atmosphere in the required atmosphere (work, romantic, convenient).With proper use of local lighting, it can be minimized.
- The light should not burn in rooms that are not currently unused.This habit of a certain effort is produced by all family members in a few months.If no one is left in the house or apartment, it is recommended to turn off all power consumer devices, except for the refrigerator.
- In standby, the devices do not consume so much electricity, but if you remember how many such devices in the house, it will be clear that the number of energy is almost wasted.For example, in standby mode, an ordinary dynamic system requires 11 w / hours.
- Checking and changing old wires will not be more than saving and fire safety.The number of tees, adapters and extensions should be minimized, because they use network resistance and energy loss to 30% for use.It is better to build a few more nests while changing wires.
How to save electricity using energy-food technologies
Almost fewer or less decent modern companies producing home or computer equipment are fighting for energy protection.In the event of an increase in electricity price, it gives them competitive advantages.
The consumer of these devices should only be carefully monitored by new market offers.
- Get electrical appliances.A, A +, A ++, at least the difference between the classes of E, F, G. is interested in the interests of the difference in the most economical devices.
- However, the purchase of an energy-management device is only half.You still need to be properly used.Thus, a vacuumed bag, 40% of electricity, covered with some and ice layer in the same picture.
- Insulation of an apartment or house (the walls of the walls, door compression, balcony and log studies, which are the metal, the windows, which will keep the heat better.As a result, powerful electric heaters can be used less before starting the heating season or fresh enough, or can be used to create a more profitable conditioner at a comfortable temperature over heat.
- The easiest way to save electricity is to manage incandescent bulbs with energy.It is required to purchase a one-time purchase of more expensive lamps (energy-shirt or LEDs), but their installation is sometimes paying quite quickly over a year.Luminescent "Economy" consumes 5 times less than the usual "ilyich lamp" and LED - more than 8 times.At the same time, economic lamps serve ten times longer.
How to keep electricity at home, consider the consumption accurately
The assistant in this issue may have devices that will provide visual information on the possibility of consumer and more rational use.
- E / Energy two or three tariff electron meter.Installation will allow you to divide the energy consumed during the day and night.The night tariff is about 30% lower.This is due to the transfer of electricity networks during peak stress and transferring a part of consumption to more "quiet".Therefore, it is useful for the consumer to use such meters to use the cost of programmable power cost devices, washing machine, iron, dishwasher, pressure, pressure oven, pressure furnace, pressure furnace.The meter should be legitimated in the supplier of electricity.
- Light (Dimmer).This device is installed instead of transitions and makes it possible to adjust the brightness of the lamp light.The same lamp can use a dimmer to start, look, watch, look, look like a tv or a nightlight.There are also light regulators that are likely to go from remote control or several points.The advantage of dimmer is to extend lamps, but not all types of lighting devices can be used.
- Impulse Rele.It allows you to manage lighting from different places in the house, pressing all the lighting in the room by pressing a button and is convenient to use.
- Motion sensors.It was installed in residential and office buildings as well as in the yards.Turn light on and off the fact that the action is or not.
- Home vattmeter.Allows you to measure the power of each device, frequency and voltage consumption in the network.You can take measures to keep electricity using this information.
How to get rid of electricity at home
The strongest facilities in the house are a refrigerator and electric stove.Often people use the same fridge for more than 10 years.At the same time, this time the technology consumes the energy half of the new refrigerator during this period, so it is losing to pay for constantly saving the purchase of a new device.
- The refrigerator should not be installed in the weak ventilated corners and niches, in poor ventilated corners and niches.For the same reason, it is not recommended to put a plate and dish that opens the door inside the refrigerator, as well as a lot or longer.To save money, it is better to cool down the average mode and make it a regular basis and clean it from snow and ice.
- Every house in every house is, but here, the leadership of electricians behind it.But here's an opportunity to save energy.The size of the dishes prepared by the food should not be less than the brover used, the bottom should be.A container closed with the lid is made 20-30% faster.The burning temperature after boiling water is low, which is transferred to the cleaned mode - this dish will not affect the process of preparing food, but will reduce energy consumption.
- The washing machine operated the most stable in the adjustment load specified in the instruction.Overload or incomplete loading, as well as the baseless use of primary washing function, electricians increase the consumption between 10 and 30%.
- The electrician requires regular cleaning of the scale.Also, do not boil the full kettle for the future, water enough to brew a cup of tea.
- Gurmi Air Conditioner Only Turn on tightly closed windows and doors, because not cooling the street Select the device according to the maintenance of the room that needs to be cooled.Electricians have models of 50% reduced converter air conditioners.
This is only part of the recommendations on how to save electricity.Read more, these can be found in other items of the unit.However, we must not forget that saving resources are not only to take care of their wallets, but also the environment for children and grandchildren.
Each 100 generatur vatt means electricity, 33 liters of oil or 48 kilograms of coal or 35 cubic meters of natural gas.This is clear that the use and savings of electricity and the consumer of electricity is not only an individual question, but also the global problem of all mankind.